The PPR pipe connection is very convenient to install, […]
The PPR pipe connection is very convenient to install, so there is a considerable market for more wall mounted pipes.
PPR pipe is used as a wall-mounted HVAC pipe
This article will analyze the causes and solutions of PPR pipe leakage.
There is little chance of blisters in the PPR pipe leakage. If you use the common sense of general aluminum pipe, there are three possibilities:
First, what is the reason for the interface leakage?
1. Reason: There is damage at the pipe fitting interface.
From the decoration process, the aluminum-plastic pipe can not use the interface in the wall. Only in the position of the water outlet for the aesthetics will be buried a water pipe, there may be water leakage in this place.
PPR pipe interface hot melt connection operation process
Solution: Knock the nozzle position and replace the damaged pipe fittings and weld them.
Note: Before the construction operation, close the water valve, release the water, and then re-melt.
2, the reason: interface desoldering
Pipe fittings wholesale manufacturers to provide you with a solution: cut the leaky interface part with ppr pipe special pipe and re-heat the connection.
Second, the PPR pipe body has a breach
If the PPR pipe is damaged in the ordinary wall, the pipe must be taken out and the bad pipe removed to replace the bad pipe.
PPR Gudi plastic production experience is rich, quality is guaranteed
Note: Choose the high quality PPR produced by Gudi Plastics during installation.
3. The plumbers did not conduct the water pressure test and the pipeline leaked.
PPR pipe is used as a water and water heating sub-catch inlet and outlet pipe, and pipeline compression test is required.
The plumbers install a complete pipeline and must pass the water pressure test to ensure that the PPR pipe pipeline does not leak.
The PPR pipe itself does not leak easily even after several years of use. However, it may also encounter poor quality pipe fittings and unprofessional plumbing installations, which may lead to water leakage in the pipeline or interface, affecting daily use.